{"id":4456,"date":"2020-09-08T19:42:23","date_gmt":"2020-09-08T19:42:23","guid":{"rendered":"http:\/\/websterart.com\/wordpress\/?p=4456"},"modified":"2020-09-08T20:49:53","modified_gmt":"2020-09-08T20:49:53","slug":"storage-bin","status":"publish","type":"post","link":"https:\/\/websterart.com\/wordpress\/2020\/09\/storage-bin\/","title":{"rendered":"Storage Bin"},"content":{"rendered":"

I bought a new rubbermaid bin recently and it only lasted 3 months. I suppose it might have frozen in the bitter jtree snow storm, but still, I’ve had them last 10 years.<\/p>\n

I bought some nice plywood from Architectural Woods downtown: #2500, 1\/4 x 4 x 8, C2 white maple appleply 5 ply NAUF carb 9310 phase 2 compliant<\/p>\n

The key to a tight box seems to be to cut\u00a0 the bottom and long sides same measurements. Then cut the short end pieces 0.5″ shorter. Assemble it with the short sides attached to the longer bottom first, using temporary shim pieces for alignment. It’s kind of a no brainer…but it took me 4 bad wood boxes to figure this out.<\/p>\n